Das GSF wandelt Links in Affiliate Links um, um ggf. eine Provision erhalten zu können. Gerne nutzen bitte, danke! Mehr Infos, wie ihr das GSF unterstützen könnt, findet ihr im GSF Support Topic.

Rod switching

Folgen

Geschrieben 11. Mai 200620 Jr.

Hi all,

is it possible to put the rod from a PX 125/150 crank into a 200 crank?

I mean, is bearing size at the bottom of the rods the same?

Thanks,

Matt

Geschrieben 11. Mai 200620 Jr.

Hi all,
is it possible to put the rod from a PX 125/150 crank into a 200 crank?
I mean, is bearing size at the bottom of the rods the same?
Thanks,
Matt

Hi Matt,

best practice is to verify and compare partnumber of roller bearings in an Piaggio spare parts catalogue. If you haven´t, I can try to check this out at comming weekend. (I´ve got such a book)

Best wishes

Wolfgang

Geschrieben 11. Mai 200620 Jr.

Autor

Hi Matt,
best practice is to verify and compare partnumber of roller bearings in an Piaggio spare parts catalogue. If you haven´t, I can try to check this out at comming weekend. (I´ve got such a book)
Best wishes
Wolfgang

Ok thanks, but if you check you'll make me a favour...

I noticed that 200 crank shoulders are wider that 125/150s' so I think that with 200 shoulders and 125/150 rod I could widen more the valve hopefully for bigger carburettors. Has Anyone tried this?

Gruss,

Matt